Catalog

    1

    ACCESSORIES

      ASDF1447

      BLOW GUNS

      COUPLERS AND PLUGS

        SPRAY GUNS

          VALVES


            2073 Epoxy Spray Nozzle Replacement
            Cost: $2.67

            Siphon Tip for Siphon Spray Gun #2044 and #2046. 1/2-27 NPT Female.


            2075 7FT. Vinyl Siphon Tube
            Cost: $2.10

            For #2044, #2046 and #8019 Spray Guns. 1/4" I.D., 5/16" O.D. Fits #2054 and #2073 Siphon Tips.


            2061 Blow Gun Booster Nozzle
            Cost: $3.87

            2065 Inflator Tip
            Cost: $ .72

            2062 6" Extension Pipe Only
            Cost: $7.29

            Threaded 1/8" NPT Male on one end.


            2001 Basic Saftey-Type Blow Gun With Hang-Up Hook
            Part Number: 2001
            Cost:$7.95

            SAFETY LEVER BLOW GUN WITH HANG-UP HOOK

            Packaged (1)/Box, (1)/ Card

            MEETS OSHA SAFETY STANDARDS
            Inlet pressure 150 P.S.I., maximum nozzle pressure 30 P.S.I
            BASIC SAFETY-TYPE BLOW GUN with large hang-up hook and blow ranging from a whisper to a blast.


            2003 Booster Blow Gun With Hang-Up Hook
            Part Number: 2003

            SAFETY LEVER BLOW GUN WITH HANG-UP HOOK

            Packaged (1)/Box, (1)/ Card

            MEETS OSHA SAFETY STANDARDS
            Inlet pressure 150 P.S.I., maximum nozzle pressure 30 P.S.I
            Booster Blow Gun for that extra blast.


            2005 Cone of Silence With Hang-Up Hook
            Part Number 2005
            Cost: $15.51

            PRINCIPLE: Cone of Silence
            Packaged (1)/Box, (1)/ Card

            MEETS OSHA SAFETY STANDARDS
            Inlet pressure 150 P.S.I., maximum nozzle pressure 30 P.S.I
            The nozzle discharges air from a thin slot, and the resulting high velocity stream attaches to the exterior contours of the nosepiece. As the thin sheet of fast moving air travels over the nosepiece, it pulls large quantities of air from the surroundings and creates a total flow over 25 times as great as the compressed air consumption.


            2007 Rubber Tipped Cone of Silence With Hang-Up Hook
            Part Number: 2007
            Cost: $19.29

            PRINCIPLE: Rubber Tipped Cone of Silence

            Packaged (1)/Box, (1)/ Card

            MEETS OSHA SAFETY STANDARDS
            Inlet pressure 150 P.S.I., maximum nozzle pressure 30 P.S.I
            The nozzle discharges air from a thin slot, and the resulting high velocity stream attaches to the exterior contours of the nosepiece. As the thin sheet of fast moving air travels over the nosepiece, it pulls large quantities of air from the surroundings and creates a total flow over 25 times as great as the compressed air consumption.


            2009 Heavy Duty Blow Gun With Safety By-Pass
            Part Number: 2009
            Cost: $12.42

            Model 2009 ia available with Extensions up to six feet. For guns with extensions, order part number 2011 through 2018.

            MEETS OSHA SAFETY STANDARDS
            Inlet pressure 150 P.S.I., maximum nozzle pressure 30 P.S.I
            SAFETY BLOW GUNS AND NOZZLES
            Packaged (1)/Box, (1)/ Card

            All models meet the requirements for safety and health regulations under the Occupational Safety and Health Administration Regulations.


            2011 Heavy Duty Blow Gun With Safety By-Pass with 6" extension
            Part Number: 2011
            Cost: $16.92

            Gun with 6" extension
            Packaged (1)/Box, (1)/ Card

            All models meet the requirements for safety and health regulations under the Occupational Safety and Health Administration Regulations.


            2012 Heavy Duty Blow Gun With Safety By-Pass With 12" Extension
            Part Number: 2012
            Cost: $17.70

            Gun with 12" Extension

            Packaged (1)/Box, (1)/ Card

            All models meet the requirements for safety and health regulations under the Occupational Safety and Health Administration Regulations.


            2013 Heavy Duty Blow Gun With Safety By-Bass With 24" Extension
            Part Number: 2013
            Cost: $18.96

            Gun With 24" Extension
            Packaged (1)/Box, (1)/ Card

            All models meet the requirements for safety and health regulations under the Occupational Safety and Health Administration Regulations.


            2014 Heavy Duty Blow Gun With Safety By-Pass with 36" Extension
            Part Number: 2015
            Cost: $20.22

            Gun With 36" Extension
            Packaged (1)/Box, (1)/ Card

            All models meet the requirements for safety and health regulations under the Occupational Safety and Health Administration Regulations.


            2016 Heavy Duty Blow Gun With Saftey By-Pass With 48" Extension
            Part Number: 2016
            Cost: $24.45

            Gun With 48" Extension
            Packaged (1)/Box, (1)/ Card

            All models meet the requirements for safety and health regulations under the Occupational Safety and Health Administration Regulations.


            2017 Heavy Duty Blow Gun With Safety By-Pass 60" Extension
            Part Number: 2017
            Cost: $28.83

            Gun With 60" Extension
            Packaged (1)/Box, (1)/ Card

            All models meet the requirements for safety and health regulations under the Occupational Safety and Health Administration Regulations.


            2018 Heavy Duty Blow Gun With Safety By-Pass With 72" Extension
            Part Number: 2018
            Cost: $31.29

            Gun With 72" Extension
            Packaged (1)/Box, (1)/ Card

            All models meet the requirements for safety and health regulations under the Occupational Safety and Health Administration Regulations.


            2019 6" EXTENSION ONLY for Heavy Duty Blow Gun With Saftey By-Pass
            Part Number: 2019
            Cost: $6.63


            Extension Only for Heavy Duty Gun.


            2020 12" EXTENSION ONLY for Heavy Duty Blow Gun With Saftey By-Pass
            Part Number: 2020
            Cost: $7.59

            Extension only for Heavy Duty Blow Gun.


            2021 24" EXTENSION ONLY for Heavy Duty Blow Gun With Saftey By-Pass
            Part Number: 2021
            Cost: $8.82

            Extension only for Heavy Duty Blow Gun.


            2022 30"EXTENSION ONLY for Heavy Duty Blow Gun With Saftey By-Pass
            Part Number: 2022
            Cost: $10.11

            Extension Only for Heavy Duty Blow Gun.


            2023 36" EXTENSION ONLY for Heavy Duty Blow Gun With Saftey By-Pass
            Part Number: 2023
            Cost: $12.27

            Extension Only for Heavy Duty Blow Gun.


            2024 48" EXTENSION ONLY for Heavy Duty Blow Gun With Saftey By-Pass
            Part Number: 2024
            Cost: $14.91

            Extension Only for Heavy Duty Blow Gun.


            2025 60" EXTENSION ONLY for Heavy Duty Blow Gun With Saftey By-Pass
            Part Number: 2025
            Cost: $17.70

            Extension Only for Heavy Duty Blow Gun.


            2026 72" EXTENSION ONLY for Heavy Duty Blow Gun With Saftey By-Pass
            Part Number: 2026
            Cost: $20.07

            Extension Only for Heavy Duty Blow Gun


            2078 Specialty Blow Gun
            Part Number: 2078

            Safety blow gun delivers large amounts of air for heavy duty work. It has a 1/2" pipe thread for convenience plus the added feature of the control valve. This blow gun offers great savings in compressed air-a "must" in any shop.


            2079 Specialty Blow Gun
            Part Number: 2079

            Large volume safety blow gun with the convenience of a standard valve has many uses where high volume is required. Standard 1/4" NPT inlet.


            2081 Specialty Blow Gun
            Part Number: 2081

            Replaces 1/2" open pipe extension. Ideal for "straddle milling" or other machining where tremendous quantities of chips must be removed. A safe quieter nozzle has a great savings in compressed air with the convenience of a standard valve. Standard 1/4" NPT inlet.


            2082 Pistol Grip Blow Gun
            Part Number: 2082
            Contact Customer Service directly for quote.

            Guns with Extensions nlet Connection
            2082-12 12"
            2082-15 15"
            2082-18 18"
            2082-24 24"


            2000K Blow Gun Kit
            Part Number: 2000K
            Cost: $17.85
            POWERFUL KIT WITH QUICK CHANGE FEATURES

            Complete with five (5) different tips that are quickly changed by a quick push and pull. Comes with a popular hooked Blow Gun Body and a vinyl pack to keep nozzles available. Three of the nozzles meet OSHA Requirements and do about 90% of all jobs associated with a Blow Gun. The rubber Tip and the Needle Tip should be used with 30 PSI.
            Patent Pending

            QUICK CHANGE NOZZLES

            1. RUBBER TIP - Blow out Fluid Lines and delicate surfaces
            2. BOOSTER TIP - Highest Flow for chip removel
            3. STAR TIP - Quiet full blast high flow
            4. SCREEN TIP - Helps prevent blow-back
            5. NEEDLE TIP - For small holes

            To change tips pull back plastic ring and remove nozzle. To insert new nozzle simply push in.
            Nozzles #1- #5 do not meet OSHA specifications. Inlet 30 PSI limit.


            2042 Blow AND Spray Gun
            Part Number: 2042
            Cost: 12.24

            Will spray gasoline, kerosene, water or other non-congealing liquids. Hose connections 1/4" female pipe threads, 1/4" inlet tube fitting connector.

            WITHOUT SAFETY BYPASS

            Packaged (1)/Box, (1)/card

            WARNING: The blow guns on this page do not conform to OSHA standards for safety unless the inlet pressure is reduced to 30 PSI.


            2044 Siphon Spray Gun
            Part Number: 2044
            Cost: $18.68

            Blows air with high-viscosity liquids for those tough cleaning jobs. Complete with 7ft. siphon hose.

            WITHOUT SAFETY BYPASS

            Packaged (1)/Box, (1)/card

            WARNING: The blow guns on this page do not conform to OSHA standards for safety unless the inlet pressure is reduced to 30 PSI.


            2046 Siphon Spray Gun, 12" Barrel
            Part Number: 2046
            Cost: $19.62

            High viscosity fluids can be sprayed with this ultra-powerful spray gun. Maximum: 150 P.S.I. 1/4" NPT female inlet. Comes complete with siphon hose.

            WITHOUT SAFETY BYPASS

            Packaged (1)/Box, (1)/card

            WARNING: The blow guns on this page do not conform to OSHA standards for safety unless the inlet pressure is reduced to 30 PSI.


            2054 Siphon Tip
            Part Number: 2054
            Cost: $2.91

            Converts regular blow gun to spray gun. 1/8" NPT.

            WITHOUT SAFETY BYPASS

            Packaged (1)/Box, (1)/card

            WARNING: The blow guns on this page do not conform to OSHA standards for safety unless the inlet pressure is reduced to 30 PSI.


            1001 1/4" Plated Steel Coupler 1/4" Series Male Thread
            Part Number: 1001
            Cost: $4.26

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE

            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1004 1/4" Plated Steel Coupler 1/4" Series Female Thread
            Part Number: 1004
            Cost: $4.26

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1007 1/8" Plated Steel Plug 1/4" Series Male Thread
            Part Number: 1007

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1010 1/4" Plated Steel Plug 1/4" Series Male Thread
            Part Number: 1010
            Cost: $1.08

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1022 1/8" Plated Steel Coupler 1/4" Automotive Standard Series Male Thread
            Part Number: 1022
            Cost: $4.74

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1023 1/4" Plated Steel Coupler 1/4" Automotive Standard Series Male Thread
            Part Number: 1023
            Cost: $6.12

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1027 3/8" Plated Steel Coupler 1/4" Automotive Standard Series Male Thread
            Part Number: 1027
            Cost: $7.74

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1026 1/4" Brass Coupler 1/4" Automotive Standard Series Male Thread
            Part Number: 1026
            Cost: $6.12

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1028 1/8" Plated Steel Coupler 1/4" Automotive Standard Series Female Thread
            Part Number: 1028

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1029 1/4" Plated Steel Coupler 1/4" Automotive Standard Series Female Thread
            Part Number: 1029
            Cost: $3.18

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1032 1/4" Brass coupler 1/4" Automotive Standard Series Female Thread
            Part Number: 1032
            Cost: $6.39

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1033 3/8" Plated Steel coupler 1/4" Automotive Standard Series Female Thread
            Part Number: 1033

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1034 1/4" Plated Steel Hose Barb Coupler 1/4" Automotive Standard Series
            Part Number:1034
            Cost: $8.55

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1035 3/8" Plated Steel Hose Barb Coupler 1/4" Automotive Standard Series
            Part Number:1035
            Cost: $8.79

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1036 1/4" Plated Steel Lock-On Hose Barb Coupler 1/4" Automotive Standard Series
            Part Number:1036

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1037 3/8" Plated Steel Lock-On Hose Barb Coupler 1/4" Automotive Standard Series
            Part Number:1037

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1013 1/8" Plated Steel Plug 1/4" Series Female Thread
            Part Number:1013

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1016 1/4" Plated Steel Plug 1/4" Series Female Thread
            Part Number:1016
            Cost: $1.20

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1038 1/8" Plated Steel Plug 1/4" Automotive Standard Series Male Thread
            Part Number:1038

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1039 1/4" Plated Steel Plug 1/4" Automotive Standard Series Male Thread
            Part Number:1039

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1042 1/4" Brass Plug 1/4" Automotive Standard Series Male Thread
            Part Number:1042
            Cost: $1.26

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1043 3/8" Plated Steel Plug 1/4" Automotive Standard Series Male Thread
            Part Number:1043

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1044 1/8" Plated Steel Plug 1/4" Automotive Standard Series Female Thread
            Part Number:1044

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1045 1/4" Plated Steel Plug 1/4" Automotive Standard Series Female Thread
            Part Number:1045
            Cost: $ .72

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1049 3/8" Plated Steel Plug 1/4" Automotive Standard Series Female Thread
            Part Number:1049

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1050 1/4" Plated Steel Hose Barb Plug 1/4" Automotive Standard Series
            Part Number:1050
            Cost: $4.08

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1051 3/8" Plated Steel Hose Barb Plug 1/4" Automotive Standard Series
            Part Number:1051

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1052 1/4" Plated Steel Lock-On Hose Barb Plug 1/4" Automotive Standard Series
            Part Number:1052

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1053 3/8" Plated Steel Lock-On Hose Barb Plug 1/4" Automotive Standard Series
            Part Number:1053

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1048 1/4" Brass Plug 1/4" Automotive Standard Series Female Thread
            Part Number:1048
            Cost: $1.47

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1054 1/4" Plated Steel Recapper Coupler 1/4" Series Female Thread Raised Sleeve
            Part Number:1054

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1055 1/4"/302-32 Thread Plated Steel Plug 1/4" Male Thread
            Part Number:1055

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1055A 302-32 Thread Plated Steel Plug Female Thread
            Part Number:1055A

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1056 1/4" Plated Steel Coupler 3/8" Automotive Standard Series Male Thread Male Thread
            Part Number:1056

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1058 3/8" Plated Steel Coupler 3/8" Automotive Standard Series Male Thread
            Part Number:1058

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1061 1/4" Plated Steel Coupler 3/8" Automotive Standard Series Female Thread
            Part Number:1061

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1063 3/8" Plated Steel Coupler 3/8" Automotive Standard Series Female Thread
            Part Number:1063

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1066 3/8" Plated Steel Hose Barb Coupler 3/8" Automotive Standard Series
            Part Number:1066

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1067 1/4" Plated Steel Plug 3/8" Automotive Standard Series Male Thread
            Part Number:1067

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1069 3/8" Plated Steel Plug 3/8" Automotive Standard Series Male Thread
            Part Number:1069

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1071 1/2" Plated Steel Plug 3/8" Automotive Standard Series Male Thread
            Part Number:1071

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1072 1/4" Plated Steel Plug 3/8" Automotive Standard Series Female Thread
            Part Number:1072

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1074 3/8" Plated Steel Plug 3/8" Automotive Standard Series Female Thread
            Part Number:1074

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1076 1/2" Plated Steel Plug 3/8" Automotive Standard Series Female Thread
            Part Number:1076

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1077 3/8" Plated Steel Hose Barb Plug 3/8" Automotive Standard Series
            Part Number:1077

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1078 1/2" Plated Steel Hose Barb Plug 3/8" Automotive Series
            Part Number:1078

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1079 3/8" Plated Steel Coupler 1/2" Series Male Thread
            Part Number:1079

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1080 1/2" Plated Steel Coupler 1/2" Series Male Thread
            Part Number:1080

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1081 3/8" Plated Steel Coupler 1/2" Series Female Thread
            Part Number:1081

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1082 1/2" Plated Steel Coupler 1/2" Series Female Thread
            Part Number:1082

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1083 3/8" Plated Steel Plug 1/2" Series Male Thread
            Part Number:1083
            Cost: $5.10

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1084 1/2" Plated Steel Plug 1/2" Series Male Thread
            Part Number:1066
            Cost: $3.96

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1085 3/8" Plated Steel Plug 1/2" Series Female Thread
            Part Number:1085
            Cost: $4.29

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1086 1/2" Plated Steel Plug 1/2" Series Female Thread
            Part Number:1086
            Cost: $4.32

            ORIGINAL DIAMOND-U BALL-TITE SWIVEL-TYPE
            Plated steel couplers have hardened steel balls and stainless steel plugs. Coupler plugs are heat treated to reduce wear on critical mating surfaces.

            SPECIFICATIONS: ALL 1/4, 3/8 AND 1/2: MAXIMUM INLET PRESSURE 300 P.S.I, SEALS BUNA-N, THREADS N.P.T, PLUGS CASE-HARDENED STEEL.

            WARNING: Couplers and plugs on this page are intended for use on compressed air lines only. All have a maximum rated working pressure of 300 PSI.


            1088 1/4" Plated Steel Coupler 1/4" Industrial Interchange Series Male Thread
            1088 Steel Coupler 1/4" Industrial Interchange Series Male Thread

            Part Number: 1088
            Cost: $3.69


            1091 1/4" Brass Coupler 1/4" Industrial Interchange Series Male Thread
            1091 1/4" Brass Coupler 1/4" Industrial Interchange Series Male Thread

            Part Number: 1091
            Cost: $4.80


            1091 1/4" Brass Coupler 1/4" Industrial Interchange Series Male Thread
            1091 1/4" Brass Coupler 1/4" Industrial Interchange Series Male Thread

            Part Number: 1091
            Cost: $4.80


            1094 1/4" Plated Steel Coupler 1/4" Industrial Interchange Series Female Thread
            1094 1/4" Plated Steel Coupler 1/4" Industrial Interchange Series Female Thread

            Part Number: 1094
            Cost: $3.36


            1097 1/4" Brass Coupler 1/4" Industrial Interchange Series Female Thread
            1097 1/4" Brass Coupler 1/4" Industrial Interchange Series Female Thread

            Part Number: 1097
            Cost: $4.80


            1098 1/8" Plated Steel Coupler 3/8" Industrial Interchange Series Female Thread
            1098 1/8" Plated Steel Coupler 3/8" Industrial Interchange Series Female Thread

            Part Number: 1098
            Cost: $7.81


            1104 1/4" Plated Steel Plug 1/4" Industrial Interchange Series Male Thread
            1104 1/4" Plated Steel Plug 1/4" Industrial Interchange Series Male Thread

            Part Number: 1104
            Cost: .84


            1107 1/4" Brass Plug 1/4" Industrial Interchange Series Male Thread
            1107 1/4" Brass Plug 1/4" Industrial Interchange Series Male Thread

            Part Number: 1107
            Cost: $1.14


            1113 1/4" Brass Plug 1/4" Industrial Interchange Series Female Thread
            1113 1/4" Brass Plug 1/4" Industrial Interchange Series Female Thread.

            Part Number: 1113
            Cost: $1.38